iPodWizard.net

suproach · 03-26-2005, 10:18 AM

(This idea was kinda taken kinda mine)
Parts:
1 pair of old headphones (best kind are the cheap wraparounds or these

)
1 Card or altoids tin
Depending on ur headphone type you made or may not needa pen and/or knife
Steps
1. Remove headphone pad. Pretty straightforward.
2. Pop off the back coverin on the headphones (on the oposite side of what was covered with foam)
3. Remove the plastic peice which extends from the central speker. To do this you must first break any securing clamps. (Use your teeth). Now is where you may need your pen and/or knife. Push down very hard on the center peice, trying to thrust it out of the larger plastic ring. Then slice any tape or glue away with ur pen or knif.e
4. The hard part is complete.
5. Put the headphones, place where the foam was side up on the tin. No tape needed. This is the main reason why they wrok so well. The sound is conducted from the magnet and makes the rest of the lid vibrate.
6. Put The Two foam pads you removed from the headphones into the tin. One on the bottom and one slopeing slightly up on the oposite side. Place the ipod in there. Perfect andgle for control and use, while the ipod remains protectected. (To make it also a docking port drill a hole the size of a dock conector near the botto, to line up with whatever angle you mount you ipod.)
7. dowlnload the goPod aplication here:http://gopod.free-go.net/index_en.htm#, and use it.
8. Set your ipods volume enhancer in itunes higher than usual for louder sound.
9. Sync your ipod
10. Put the ipod in the stand, plug the speakers in, set ur ipods eq to Bass booster or small spekers and rock out.
(Pics will cum when i get my digicam working.)
Credit forsome ideas go to Ken Kirkpatrick
Walnut Creek, California

suproach · 03-28-2005, 10:13 AM

bumpy???????

z3rb · 03-28-2005, 01:59 PM

Quote:

Originally Posted by suproach

bumpy???????

What??????????/

suproach · 03-28-2005, 02:55 PM

Bumpy *Bump* El Bumbo The clasic way on forums to send ur posts back to the top of the lists to give it a second chance at getting coments

Murdoc · 03-28-2005, 03:07 PM

thats awesome, pics would definatly help, as i have an Icebreakers mint tin (round) and it would be perfect for this,, hurry up those pics please..

mmmm... bumberific << :|

suproach · 03-28-2005, 03:30 PM

I want to find my digicam just as much as you do. MAke sure the tin is acutally made of some magnetic substance.

BiT · 04-16-2005, 02:31 PM

i use my stock earphones for "speakers"... they work good for me

GAS · 04-16-2005, 02:55 PM

i just skimmed through this text so what exactly does this do? make speakers?

rda52 · 04-16-2005, 03:05 PM

if you post pics il try it

GAS · 04-16-2005, 03:09 PM

sorry just read the title i know what is goin on ill try it with pics

03-26-2005, 10:18 AM		#1
	suproach Apprentice iPodder Join Date: Feb 2005 Location: UP IN NYC Posts: 157	The Ultra Cheap iPod Stand/Speakers/Acessory Case! (This idea was kinda taken kinda mine) Parts: 1 pair of old headphones (best kind are the cheap wraparounds or these ) 1 Card or altoids tin Depending on ur headphone type you made or may not needa pen and/or knife Steps 1. Remove headphone pad. Pretty straightforward. 2. Pop off the back coverin on the headphones (on the oposite side of what was covered with foam) 3. Remove the plastic peice which extends from the central speker. To do this you must first break any securing clamps. (Use your teeth). Now is where you may need your pen and/or knife. Push down very hard on the center peice, trying to thrust it out of the larger plastic ring. Then slice any tape or glue away with ur pen or knif.e 4. The hard part is complete. 5. Put the headphones, place where the foam was side up on the tin. No tape needed. This is the main reason why they wrok so well. The sound is conducted from the magnet and makes the rest of the lid vibrate. 6. Put The Two foam pads you removed from the headphones into the tin. One on the bottom and one slopeing slightly up on the oposite side. Place the ipod in there. Perfect andgle for control and use, while the ipod remains protectected. (To make it also a docking port drill a hole the size of a dock conector near the botto, to line up with whatever angle you mount you ipod.) 7. dowlnload the goPod aplication here:http://gopod.free-go.net/index_en.htm#, and use it. 8. Set your ipods volume enhancer in itunes higher than usual for louder sound. 9. Sync your ipod 10. Put the ipod in the stand, plug the speakers in, set ur ipods eq to Bass booster or small spekers and rock out. (Pics will cum when i get my digicam working.) Credit forsome ideas go to Ken Kirkpatrick Walnut Creek, California

03-28-2005, 10:13 AM		#2
	suproach Apprentice iPodder Join Date: Feb 2005 Location: UP IN NYC Posts: 157	bumpy???????

03-28-2005, 02:55 PM		#4
	suproach Apprentice iPodder Join Date: Feb 2005 Location: UP IN NYC Posts: 157	Bumpy Bump El Bumbo The clasic way on forums to send ur posts back to the top of the lists to give it a second chance at getting coments

03-28-2005, 03:07 PM		#5
	Murdoc Master iPodder Join Date: Feb 2005 Location: Ontario, Canada Posts: 700	thats awesome, pics would definatly help, as i have an Icebreakers mint tin (round) and it would be perfect for this,, hurry up those pics please.. mmmm... bumberific << :\|

03-28-2005, 03:30 PM		#6
	suproach Apprentice iPodder Join Date: Feb 2005 Location: UP IN NYC Posts: 157	I want to find my digicam just as much as you do. MAke sure the tin is acutally made of some magnetic substance.

04-16-2005, 02:31 PM		#7
	BiT Poo. Join Date: Apr 2005 Location: Nijmegen, The Netherlands. Posts: 4,620	i use my stock earphones for "speakers"... they work good for me

04-16-2005, 02:55 PM		#8
	GAS RIP Join Date: Mar 2005 Posts: 3,012	i just skimmed through this text so what exactly does this do? make speakers?

04-16-2005, 03:05 PM		#9
	rda52 Über iPodder Join Date: Mar 2005 Location: The 619 Posts: 1,174	if you post pics il try it

04-16-2005, 03:09 PM		#10
	GAS RIP Join Date: Mar 2005 Posts: 3,012	sorry just read the title i know what is goin on ill try it with pics